Areomatic S9 Fluid Bed Drier/Granulator

Unused Aeromatic S9 fluid bed drier/granulator in 316L stainless steel. Automatic batch drier complete with inlet air heater and fan, exhaust fan, control panel and sensors. Chamber diameter 2300 mm, filter bed diameter approx 1675 mm , overall height from floor up to top of filter support rams 11218 mm, explosion relief vent, 4 sets of dust filter modules each with 37 sock cages, with filter blow-out device, spray nozzles, automatic product feeding device, automatic discharge into conical discharge container, the product container has 2 choppers installed to break up the product to improve drying and granulation each with their own motor. The dryer has pneumatic safety clamps fitted. Air regulation flaps. Hinged product container.
Data
Filter housing pressure shock resistance 2 bar (excess pressure),
tripping pressure ex-flap less than 0.1 bar (excess pressure)
Exhaust air filter surface - 58 m²
Injection nozzle max. spray volume 7.2-10.8 l/min
compressed air consumption. 270 Nm³/h
Material container pressure shock resistance 2 bar (excess pressure)
volume 1.5 m³
base area 2.2 m²
Air preparation housing pressure shock resistance 0 .02 bar (excess pressure)
Coarse dust filter separation degree ASHRAE 45%
filter surface 9 m²
Steam air heater heating capacity 3,124,850 Kj/H
inlet air temperature -10°C
exhaust air temperature +80°C
heating medium steam 0.5 bar (excess pressure)
max. steam consumption 1,404 kg/h
average steam consumption 772 kg/h
Fan air supply 8 m³/s
static pressure 7,000 N/m²
energy consumption 75 kW
speed 2900 1/m