Call us on +44 (0)1642 701 116

Oil Drilling Rig

Stock No: 300360

Working Volume: 5000 m

Working Volume: 0 Units/min

Used Super Single Mobile drilling rig for sale with Automatic Pipe handling system.

 Modular construction
 Variable rig layout
 low total height; only 31m (102 ft) incl. Substructure
 Small footprint: approx. 1,224 m² (13,176 ft²) of basic equipment
 Low noise emission
 Skid-able along the longitudinal axis
 safety system DIN EN 61508

Features

Hydraulic top drive
Top drive (rotary unit) and draw-works (carriage) are integrated in a carriage system. The carriage system is moved along the mast by a rack and pinion system. Carriage loads and torque are transformed via the tracks and the mast.
Additionally the carriage system is directly engaged using gear racks which are integrated into the mast. The top drive is equipped with a specially designed break/lock system which can prevent uncontrolled movement even if the lines or hoses fail or the hydraulic system breaks down.

Optional
- casing drilling

Max Depth
- 5000 m (16400 ft)

Mast
- welded box type with 2 integrated gear tracks on the sides
- clear working height 16.7 m (54.8 ft
- max. working load: 3,700 kN (831,793 lbf)
- standard working load: 3,300 kN (741,869 lbf)
- overall height with substructure: 31m (102 ft)

Substructure
- 6 modules in the side of 40' containers(3 modules on each side)
- footprint incl. Clearance for cellar: 8 x12.2 m (26.3 x 40 ft)
- substructure clearance: 3.12 m (10.2 ft)
- height to to bottom edge of rotary table support: 7.7 m (25.3 ft)
- preventer stack lifting system: 2 x 196 kN (2 x 44,063 lbf)

Rotary Table
- table opening: 957 mm (37½”)
- static capacity: 3,700 kN (831,793 lbf)
- max rpm: 10 min-1
- max torque: 45,000 Nm (33,190 ft.lbf)

Top drive
- static capacity: 3,700 kN (831,793 lbf)
- max torque; 85,000 nm (62,693 ft.lbf)
- max rpm: 190 min-1
- max circulation pressure: 345 bar (5,000 psi)

Tubular Handling Equipment

Pipehandler
- tubular sizes: 2½” to 20” up to Range III

Iron Roughneck
- manufacturer: Maritime Hydraulics AS
- type MH 4160
- pipe diameter (OD): 2⅞” to 9½”
- max make-up torque: 84,000 Nm (61,955 ft.lbf)
- max break-out torque: 108,500 nm (77,444 ft.lbf)

Trip Time
 up to 400 m/h (1,312 ft/h)

Power Generation

VDD 370.1 Synergy I
- 4 x 1,065 kVA AC generator ACG 1250-4-690

VDD 370.2 VarioRig
- 4 x 500 kVA AC generator HC. 1534D2

VDD 370.3 Synergy II
- 4 x 1,065 kVA AC generator MJB 400LB34

optional converter unit to connect rig to grid

Hydraulic System
- 1 power pack for top drive and iron roughneck
- 1 power pack for all auxiliary appliances

Fuel Storage
- 1 fuel tank: 20 m³ (126 bbl) with automatic refill system for the generators
- optional 2x

Data Acquisition System
- comprehensive system to acquire and digitally stor all relevant drilling and operating parameters
- remote diagnostic system for drilling rig

Blow Out Prevention Equipment (Example)

Stack Configuration
- 1 annular preventer Wp Shaffer Spherical BOP 13⅝” , 345 bar (5,000 psi)
- 1 double ram preventer Cameron Type Double “U” 13⅝”, 690 bar (10,000 psi ) with 4 x 41/16” outlets standard bore shear bonnets and large bore shear bonnets (with tandem booster) 2⅞” to 5” VBA, 1 x blind shear rams
- 1 single ram preventer Cameron Type Single “U” 13⅝”, 690 bar (10,000 psi ) with 4 x 41/16” outlets

Accumulator Unit
- manufacturer: Koomey
- capacity: 260 gal
- working pressure: 207 bar (3,000 psi)
- 1 remote control

Degasser
 poor boy degasser, optional vacuum degasser

Choke Manifold
- rated working pressure: 690 bar (10,000 psi)
- nominal diameter 31/16”

Drill Pipe
- will be supplied as required by the customer

Mud System

Mud Pumps (Depending on the rig)

VDD 370.1 Synergy I
- 2 x Wirth TPK 1600
- 12” stroke 5½” to 7½” piston, 5½” up to 350 bar (~5,000 psi)
- input power for each pump: E-engine, 1,193 kW (1,600 HP)
- 2 centrifugal charging pumps, 55 kW (74 HP)

VDD 370.2 VarioRig
- 5 x Metax MP7M
- 7” stroke 5” to 6” piston, 5” up to 350 bar (~5,000 psi)
- input power for each pump: E-engine, 440 kW (590 HP)
- 1 centrifugal charging pump, 55 kW (74 HP)

VDD 370.3 Synergy II
- 3 x Hong Hua HHF 1000
- 10” stroke 4½” to 6¾” piston, 4½” up to 350 bar (~5,000 psi)
- input power for each pump: E-engine, 735 kW (986 HP)
- 3 centrifugal charging pumps, 55 kW (74 HP)

Mud Tanks
- suction tank: 60 m³ (377.4 bbl)
- mix tank : 40 m³ (251.6 bbl)
- pill tank I: 9.5 m³ (59.8 bbl)
- pill tank II: 9.5 m³ (59.8 bbl)
- silo: 2x 30 m³ (2 x 188.7 bbl)
- 1 hopper
- 2 mixing and transfer pumps NOV Magnum, 55 kW (74 HP)
- optional upgrade

Solids Control System
- 1 Derrick Flow-Line Primer
- 3 Derrick FLC 2000 4-panel shale shaker
- 2 Derrick DE 1000-FHD centrifuges
- 1 Derrick Flo-Divider
- 2 moineau pumps Bornmann EH 1500 to feed centrifuges
- optional; hydrocyclone desilter 16 x 4”

Air System
- 1 compressor: Atlas Copco GA 30C3
- max volume: 4.5 m³ (28.3 bbl)
- max pressure; 13 bar (188.5 psi)